Mbt-lighting LEDPAR64 (SRL-6044SB) Manual de usuario descargar pdf (Pagina 8)

0 1 MEDIUM 2

1 1 LOWEST

A. Auto mode

When dipswitches #9 &#10 are both set at OFF, the fixture works in Auto mode. Please

check above DIPSWITCH SETUP for reference.

B. Sound Active mode

When dipswitch #9 is ON and dipswitch #10 is OFF the fixture works in Sound active mode.

Please check above DIPSWITCH SETUP for reference.

C. MASTER/SLAVE Mode

Master: set the dipswitch #10 of one LED PAR Light to OFF; the other dip switches 1-9

control the speed of the programs. Master mode has three working ways: auto with fade,

auto without fade and sound. Please refer to DIPSWITCH SETUP above.

Slave: set all the dip switch #1 & #10 to ON, #2-9 dip switches to OFF

D. DMX mode

When dipswitch #10 is set at ON, the fixture works in DMX mode. By various

combining the Dipswitches #1 to #9 you can set the address ranging from 1 to 512.

At this moment, the fixtures can be controlled by DMX controller or another fixture

that has been designated as Auto or Sound Active mode with 5 channels receiving

the data controlling the Red, Green, Blue, brightness and strobe rate output of the

fixture respectively.

Note: the address encoded by combining dipswitches #1 to #9 function as initial

channel address.

1 2 3 4 5 6 7 8 9

Sin comentarios

Mbt-lighting LEDPAR64 (SRL-6044SB) Manual de usuario Pagina 8